7 AM–7 PM · 7 days a week Callback within 45 minutes Call (480) 447-1473

Repairs & diagnostics · Glendale, AZ

Electrical Troubleshooting

Something electrical is acting up and you don't know why. That is what troubleshooting is for: find the fault, fix it, and make sure it stays fixed.

Gloved hand holding a 30-amp breaker
Testing starts at the panel, with a meter, not a guess.

Signs something is wrong

What we track down

If any of these sound familiar, the fault is findable. The hard part is knowing where to look.

  • Breakers that trip for no clear reason. Especially when nothing new was plugged in.
  • Lights that flicker or dim. Especially when a big appliance is not running.
  • An outlet or switch that stopped working. Or works only sometimes.
  • A warm outlet, switch, or panel. Heat means a loose connection somewhere, and loose connections cause fires.
  • Partial power loss. Part of the house has power and part does not.
  • A burning smell. If you smell burning or see sparking, call 911 first, then us.

How we find it

Test, don't guess

Troubleshooting is a process, not a poke around. Here is how we work through it:

  • Listen first. When it happens, what was running, and how long it has been going on tells us where to start.
  • Test with a meter. We check voltage, continuity, and load at the panel and at the fault, and narrow it down circuit by circuit.
  • Isolate the fault. A circuit, a device, or a connection. We find which one before we replace anything.
  • Fix it and re-test. The repair gets tested under load before we call it done.
  • Flag what else we find. If the fault points to a bigger problem, we price it and tell you before we touch it.

Common questions

Electrical Troubleshooting questions, answered straight

Do you charge for troubleshooting?

The evaluation is free. We come out, usually within 3 days, find the fault, and give you a straight price for the fix before any work starts.

My breaker keeps tripping. Is the breaker bad?

Sometimes. More often it is the circuit: too much load, a failing appliance, or a loose connection. We test before replacing anything, so you do not pay for a new breaker you did not need.

Is flickering dangerous?

It can be. Flickering can mean a loose connection, and loose connections make heat. If lights flicker when nothing big is running, get it looked at.

How fast can you come out?

Evaluations happen the same week, usually within 3 days. If you smell burning or see sparking, call 911 first, then us.

Something electrical acting up?

Call or send the form. We will find the fault, fix it, and make sure it stays fixed.

Call Now Get a Quote